• A high pressure laminated top with 3mm PVC edgebanding
• Thermofoil doors and drawer fronts
• Optional metal drawer system
• Available in custom sizes or finishes

High Pressure Laminate Top
Industrial grade minimum 45 lbs density EPP certified flakeboard surfaced with Wilsonart high pressure laminate. Backer applied for balanced construction. All edges banded with durable 3mm pvc guarding against impact and moisture penetration. Top, bottom and corner edges are rounded for soft feel and safety.

Side, Back and Bottom Panels
Full 3/4" thick thermofused melamine board constructed using minimum 45 lbs density EPP certified flakeboard with surfacing applied to both faces providing excellent scratch, stain, and impact resistance. Front edges of side and bottom panels finished with matching 020 pvc. Bottom edges are banded to prevent moisture absorption and act as a glide to prevent damage. All exposed edges are edgebanded. Bedside cabinets have rear vent holes to reduce odors and mildew. Backs of Armoire's and Wardrobes use a 5/16" laminated back panel using dado construction reinforces with 3/4" top, middle, and bottom stretchers.

Doors and Drawer Fronts
3/4" thick medium density fiberboard laminated with a Thermofoil (vinyl) on the panel face and all providing a decorative seamless surface that is resistant to scratching, impact, staining, and discoloration. Fronts available in multiple styles. Door hinges are fully concealed, self-closing, 110-degree European style hinge.

Shelving
Full 3/4" thick thermofused melamine board constructed using minimum 45 lbs density EPP certified flakeboard.
Front edge banded to match interior surface. Shelves over 28 1/2" long are a full 1" thick to guard against
deflection. Shelves are adjustable and lock securely into place using 300 lb capacity shelf clips.

Case Construction and Packaging
All end panels, backs, bottoms, and stretchers are hardwood doweled, glued and factory assembled using CNC precision machining and pneumatically controlled case clamp assembly to guarantee permanent tight joints. Large units such as Armoires and Wardrobes have additional metal fasteners and have two adjustable base levelers located in the front corner of each cabinet. Tops are securely fastened using #8 wood screws and can be removed. Each unit is protected using hardboard corners and shrink wrapped for protection. Depending on type of shipment, units may be hand loaded or palletized and securely banded.